Nano Hone® Honing Stone, Grit 6000 (2 microns)
Product no.:
711228
Brand:
Nano Hone
€98.90 €83.11
per piece(s)
Item available
- Abrasive Corundum
- Abrasive layer thickness 12 mm mm
- Abrasive surface size 210 x 75 mm mm
- Application Honing, from K4000, for honing after sharpening
- Base Aluminium base plate, green
Description
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
These premium stones from the American manufacturer Nano Hone are produced in Japan. The sharpening particles are of high purity and homogeneity. This is noticeable in the transition to finer grains, with the grinding marks of the previous grit being quickly removed. A special bond enables fast grinding with a flat surface. The stone has an aluminium base plate and is therefore 100 % distortion-free. Conventional sharpening stones warp in the micro range due to the absorption of water. The extremely flat aluminium base of the Nano Hone stones solves this problem. Another advantage of the aluminium base is the good legibility of the grain, which remains visible even after prolonged use. In addition, the different grain sizes can be recognised even more quickly by the different base colours. Two bores in the aluminium base allow quick and easy mounting on the Nano Hone stone holder (No. 711569). The stones should be sprayed with water before use. Permanent storage in water is not recommended. White aluminium oxide abrasive.
Properties
| Abrasive: | Corundum |
|---|---|
| Abrasive layer thickness: | 12 mm mm |
| Abrasive surface size: | 210 x 75 mm mm |
| Application: | Honing, from K4000, for honing after sharpening |
| Base: | Aluminium base plate, green |
| Bond type: | ceramic |
| Dimensions: | 210 x 75 x 15 mm |
| For tool type: | Knives and tools |
| Grade of wear: | low |
| Grit: | 6000 |
| Purity of the grain: | very high |
| Recommended steels: | High-alloy tool steels |
| Typ: | Synthetic stones |
Properties
| Abrasive: | Corundum |
|---|---|
| Abrasive layer thickness: | 12 mm mm |
| Abrasive surface size: | 210 x 75 mm mm |
| Application: | Honing, from K4000, for honing after sharpening |
| Base: | Aluminium base plate, green |
| Bond type: | ceramic |
| Dimensions: | 210 x 75 x 15 mm |
| For tool type: | Knives and tools |
| Grade of wear: | low |
| Grit: | 6000 |
| Purity of the grain: | very high |
| Recommended steels: | High-alloy tool steels |
| Typ: | Synthetic stones |
Accessories
Similar Articles
Upselling
Manufacturer
Nano Hone
Nano Hone is part of HMS Enterprises Inc., which is headquartered in the USA and has a production site in Japan. Nano Hone has over 40 years of experience in the field of sharpening, dressing and woodworking, and is dedicated to developing outstanding, innovative and high-quality sharpening products.