Tormek T-8 Original with DE-250 Diamond Grinding Wheel, Grit 1200

Inklusive kostenlosem Workshop-Gutschein!

Tormek T-8 Original with DE-250 Diamond Grinding Wheel, Grit 1200
The Tormek DE-250 diamond grinding wheel with a grit size of 1200 provides a very fine grinding...
Maximum precision and solid zinc cast housing
The TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimises jig guidance and thus the sharpening accuracy.
The Tormek DE-250 diamond grinding wheel with a grit size of 1200 provides a very fine grinding surface and is ideal for carving tools, knives, chisels or plane blades. Thanks to the additional grinding surface on the side, a straight bevel can be ground into the tool without hollow grinding. For sharpening on the side of the diamond grinding wheel, we recommend the Tormek Multi Base (MB-100) with the appropriate sharpening device for the respective tool.
Sharpening wheel »Tormek DE-250«, grit 1200, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.
Includes:
  • Square Edge Jig (SE-77)
  • Adjustable Trueing Tool (TT-50) and Stone Grader (SP-650) for purchasing additional standard sharpening wheels (water stones)
  • Anti-corrosion Concentrate, 150 ml (ACC-150)
  • Pro Angle Master (WM-200)
  • Honing Compound (PA-70)
  • Handbook (HB-10)
  • Instruction Video (DVD-1)
  • Edge marker (EM-15)
Comes with Tormek manual in German language.
Tormek Sharpening System
Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.
The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.
A summary of the advantages of Tormek sharpening machines
Longer working life of T-8 and T-4 Original:
  • Stainless steel spindle with EzyLock-System for easier stone assembling
  • Solid zinc cast housing with integrated vertical and horizontal support
  • Better motor insulation

Additional advantages of T-8 Original:
  • Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection
  • Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life
  • Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper
     
    more
    less
    Further details on the manufacturer
     
    If you buy a Tormek T-8 Original or T-4 from DICTUM, you can choose between a voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop. The voucher amount cannot be set off against the purchase of products.
     
    Article no. 716053
    Brand Tormek
    Ready to ship today, delivery time 2-3 workdays within Germany
    €789.00 per set

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Plenty of accessories and spare parts

    Accessories

    DICTUM Grinding Wheel Carbon Cut, Grit 80

    Extra-coarse wheel with hard bond for repairing damaged tool blades. Primarily suitable for double-layered blades and carbon steel. Aluminium oxide abrasive.
    €129.00
     

    Tormek Tool Rest SVD-110

    For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. »Torlock« locking system.
    €30.90

    Tormek Anti-corrosion Concentrate ACC-150

    For cleaning diamond grinding wheels and protecting them against corrosion if not used for a long time. 2 x 150 ml.
    €35.90

    (Content: €119.67 / 1 litre)

    Tormek Drill Bit Sharpening Attachment DBS-22

    Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...
    €205.00

    Tormek Gouge Jig SVD-186 R

    For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.
    €84.90

    Tormek Diamond Grinding Wheel DF-250, Grit 600

    Universal diamond grinding wheel, combines effective material removal and fine finish. Ideal for chisels and plane blades. Incl. Tormek ACC-150 Anti-corrosion Concentrate (150 ml, No. 716077 ). It is advisable to use diamond grinding...
    €264.00

    Tormek Woodturner's Kit TNT-808

    Grinding jig for woodturning tools, additional adapter for cutters, additional multi-tip adapter, multi jig, tool rest, leather honing wheel, turning tool setter, machine dust cover and instruction box for woodturners (in English). Comes...
    €292.00

    Tormek Multi Base MB-100

    Base for sharpening on the side of the diamond wheels No. 716078 , 716079 and 716080 for completely flat cutting-tool edges without hollow grind. Fits Tormek Knife Jig (No. 705203 , 705214 and 705232 ), Axe Jig (No. 705228 ),...
    €64.90

    Tormek Converter OWC-1

    Attachment to adapt the Tormek bench grinder mounting kit BGM-100 (No. 705225 ) directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.
    €14.50

    Tormek Square Edge Jig SE-77

    For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).
    €69.00

    Tormek Bench Grinder Mounting Set BGM-100

    Though primarily designed for turners, this mounting set, in combination with the gouge jig (SVD-186 R), the multi jig (SVS-50) and the tool rest (SVD-110), allows you to sharpen all turning tools with the Tormek system also on a...
    €79.90

    Tormek Small Knife Holder SVM-00

    Enables you to sharpen even the smallest knives like wood carving knives and pocket knives. Used in combination with the Tormek Knife Jig SVM-45.
    €31.80

    Tormek Scissors Jig SVX-150

    For all straight scissors' blades. Demountable hedge shears up to max. 200 mm. Blade thickness max. 9 mm
    €44.90

    Tormek Diamond Grinding Wheel DC-250, Grit 360

    Diamond grinding wheel for quick and effective material removal, ideal for pre-grinding dull blades or repairing blades with nicks. Incl. Tormek ACC-150 anti-corrosion concentrate (150 ml, No. 716077 ). It is advisable to use diamond...
    €269.00

    Tormek Honing Compound PA-70

    For leather honing wheels No. 705212 and 705197. 70 g.
    €14.50

    (Content: €207.14 / 1 kg)

    Tormek Diamond Grinding Wheel DE-250, Grit 1200

    Diamond grinding wheel for a very fine finish. Ideal for carving gouges and knives. Incl. Tormek ACC-150 Anti-corrosion Concentrate (150 ml, No. 716077 ). It is advisable to use diamond grinding wheels for wet grinding only as this...
    €264.00

    Tormek Rubber Work Mat RM-533

    This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material...
    €45.80

    Tormek Short Tool Jig SVS-38

    For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.
    €21.60

    Tormek Profiled Leather Honing Wheel LA-120

    For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.
    €50.90

    Tormek Adjustable Trueing Tool TT-50

    With diamond tip, for trueing ingrained or unround grinding wheels.
    €72.00

    Tormek Multi Jig SVS-50

    Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.
    €52.90

    Tormek Stone Grader SP-650

    For regrading and dressing Tormek sharpening stones.
    €24.90

    Tormek Rotating Base

    Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/honing or sharpening towards or away from the edge. Fits all models.
    €44.90

    Tormek Axe Jig SVA-170

    For axe heads up to 170 mm in size (larger axes can be sharpened without a jig using the universal support).
    €14.90

    Tormek Turning Tool Setter TTS-100

    For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).
    €24.90
     

    Replacement parts

    DICTUM Grinding Wheel Carbon Cut, Grit 80

    Extra-coarse wheel with hard bond for repairing damaged tool blades. Primarily suitable for double-layered blades and carbon steel. Aluminium oxide abrasive.
    €129.00
     

    Tormek Anti-corrosion Concentrate ACC-150

    For cleaning diamond grinding wheels and protecting them against corrosion if not used for a long time. 2 x 150 ml.
    €35.90

    (Content: €119.67 / 1 litre)

    Tormek Original Replacement Grinding Wheel SG-250, Grit 220

    This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.
    €159.00

    Tormek Honing Compound PA-70

    For leather honing wheels No. 705212 and 705197. 70 g.
    €14.50

    (Content: €207.14 / 1 kg)

    Tormek Diamond Grinding Wheel DE-250, Grit 1200

    Diamond grinding wheel for a very fine finish. Ideal for carving gouges and knives. Incl. Tormek ACC-150 Anti-corrosion Concentrate (150 ml, No. 716077 ). It is advisable to use diamond grinding wheels for wet grinding only as this...
    €264.00