Sharpening Tools for hunting

Extra-coarse wheel with hard bond for repairing damaged tool blades. Primarily suitable for double-layered blades and carbon steel. Aluminium oxide abrasive.

Suitable for HSS as well as carbon steel and double-layered steel. Hard bond for highly effective polishing with little abrasion.

The KME sharpening system combines a robust construction with high functionality. The sharpening process is quite simple and you hardly need any previous knowledge or experience. Stepless sharpening angle adjustment allows for cutting...

This set gives you all you need for sharpening turning tools. The low-speed DICTUM grinder DS 150 L (No. 720782 ) for cool grinding ideally complements the Wolverine sharpening system which consists of the Basic Set (No. 702170) and Vari...

With the Edge Pro Apex you can easily create good bevels on knives. Even the inexperienced can achieve optimum results with this sharpening aid after a short training period. The high-quality workmanship guarantees a long service life...

Low-speed grinder: due to a speed range of 1450 rpm, the risk of overheating is significantly reduced; conventional double-wheeled grinders usually have a speed range of more than 3000 rpm Wheel width 40 mm, an unbeatable advantage,...

This set gives you all you need for sharpening turning tools. The low-speed DICTUM grinder DS 150 L (No. 720782 ) for cool grinding ideally complements the Wolverine sharpening system which consists of the Basic Set (No. 702170) and Vari...

Low-speed grinder: due to a speed range of 1450 rpm, the risk of overheating is significantly reduced; conventional double-wheeled grinders usually operate with 3000 rpm Wheel width 40 mm, an unbeatable advantage, especially when...

With the Edge Pro Apex you can easily create good bevels on knives. Even the inexperienced can achieve good results with this sharpening aid after a short training period. Entry level model with good price-performance ratio. Full...

The gentle, highly pure aluminium oxide used for manufacturing this stone is much finer than the abrasives of other synthetic oilstones. Additionally, the stone is highly effective and does not clog too quickly. Pre-soaked with oil in...

With the sharpening system from DMT, sharpening knives and tools becomes a breeze. The portable sharpening system has a blade clamp offering a 7-angle adjustability, which covers most blade geometries - from outdoor knives to fine...

Using the guide rod, which is slightly curved at the thread, the Magna-Tec Scorpio sharpening system allows you to also sharpen rounded bevels of 3.5°. This type of bevel is particularly popular with hunting or outdoor knives and ensures...

Versatile, light oil from the seeds of the camellia tree. Corrosion protection: Camellia oil is acid-free, non-volatile and not susceptible to resinification, making it the ideal oil to protect tools, knives and weapons from rust. Made...

Very fine Japanese natural sharpening stone that is cultivated on the seabed (region Tsushima-Nagasaki). This natural sharpening stone cuts well and produces very little slurry. Also suitable for cleaning the structure of sharpening...

With the sharpening system from DMT, sharpening knives and tools becomes a breeze. The portable sharpening system has a blade clamp offering 7-angle adjustability, which covers most blade geometries - from outdoor knives to fine cooking...

Aluminium oxide abrasive.

The flange allows to adjust the 32 mm standard bore of the CBN grinding wheels to the shaft diameter of the different sharpening machines. Made of aluminium.

This stone features two different grit sizes. Abrasive: #1000 aluminium oxide and white aluminium oxide, # 3000 and 6000 white aluminium oxide.

Fine grain water stones for removing the burr, polishing and honing. White aluminium oxide abrasive.

This smooth, impregnated packaging paper with anti-corrosion additives protects your tools from moisture, rust and verdigris. A waterproof PE coating on one side provides additional protection and ensures that the emitted VCIs (vapour...

For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. »Torlock« locking system.

Linen, suitable for Tormek T-7 and T-8.

Coarse-grained stone for material removal, repairs, removing nicks, changing the bevel angle, removing corrosion. Silicon carbide abrasive.

According to the credo »the beauty of the usefulness«, Shapton has again managed to combine the subject of sharpening and the fascination of sharp blades into a natural unit. Plus, the simple, almost artistic product becomes a design...

Ballistol provides reliable rust protection, cleans and oils metals, impregnates and preserves leather and wood surfaces, and is even suitable for the disinfection of minor cuts. In the garden it can be used to treat tree cancer and to...

Aluminium support for microabrasives No. 708547 , 708548 and 708549 . Fits Edge Pro Sharpening System (No. 708550 and 708558 ). 150 x 25 mm.

For repairing nicks, this set contains a King 220 grit coarse shaping stone (No. 711010 ). The King 1000/6000 grit combination stone (No. 711006 ) rests securely on the non-skid mat (No. 705364 ) and is used for both sharpening and...

For speedy resharpening of knives (also serrated), axes and scissors. V-shaped, wear-resistant carbide element. Aluminium grip with hand protection. Includes instructions and case.

Natural fragments, planed flat on one side. From the point of view of sharpening properties comparable with Belgian bench stones. From the Tanba region.

Extreme polishing performance for mirror surfaces, thanks to hard bond. Particularly recommended for chrome-vanadium steel but also for HSS blades and double-layered steel.

Set consist of sharpening stones with grits 400 (No. 711226 ), 1000 (No. 711227 ), 6000 (No. 711228 ) and the Nano Hone Sharpening Stone Holder (No. 711219).

Glass base for diamond lapping films, including five strips of self-adhesive abrasive with the respective grit. For polishing knife blades. With increasing fineness the grit is to be classified as significantly coarser than according to...

The Delta-S sharpening guide from Magna-Tec combines the proven and traditional principle of sharpening by hand with the advantageous precision of a machine. It is possible to achieve impressive results that are not possible with a...

For sharpening and finishing. King combination stone, grit 1000/6000 (No. 711005 ); stone holder (No. 711101 ).

The Tormek DE-250 diamond grinding wheel with a grit size of 1200 provides a very fine grinding surface and is ideal for carving tools, knives, chisels or plane blades. Thanks to the additional grinding surface on the side, a straight...

For cleaning diamond grinding wheels and protecting them against corrosion if not used for a long time. 2 x 150 ml.

This set contains a Kunsuto 220 grit shaping stone (No. 711230 ) for repairing nicks and a Kunsuto 1000/6000 grit combination stone (No. 711238 ) for sharpening and honing. Use the trueing grille (No. 711297 ) for trueing the stones, the...

This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.

Self-adhesive abrasive for polishing out scratches on knife blades. Fits glass base of the Edge Pro sharpening system (No. 708550 and 708558 ). Made of aluminium oxide. The grit should be rated much finer than sharpening stones...

Conical diamond sharpener for sculpting and turning tools.

Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...

Thicker and longer lasting than the cream-coloured stones, but with equally good honing properties.

For cleaning resinified tools and all types of woodworking machinery. Simply spray and the resin can be removed easily and without residue. Effective cleaner for burned-in resin residue For saw blades, plane blades, chisels and other...

For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.

Thicker and longer lasting than the cream-coloured stones, but with equally good honing properties.

»Tormek Original« sharpening wheel (SG-250), aluminium oxide, Ø 250 x 50 mm, grit 220; leather honing wheel, Ø 215 x 30 mm; universal support, finely adjustable (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7...

These strops can be used with or without paste to polish tool blades. If necessary, you can use finishing paste on the black (rougher) side; the fine brown side is usually used for stropping without paste. Can be held by the handle or...