Nano Hone Lapping Plate Button Tech
In contrast to conventional lapping plates, this product does not have a diamond coated surface, but raised cross-shaped metal buttons that have diamonds dispersed throughout their entire structure. These buttons are virtually...
€739.00
Nano Hone Lapping Plate Ridge Tech NL-4
This lapping plate, with its arrow-rake pattern, has long straight edges designed for removing larger amounts of material, which makes it suitable for flattening rougher sharpening stones from 120 to 2000 grit. Extraordinary even surface...
€254.00
Trueing Set
Excellent-value set for the precise trueing of waterstones and oil stones. For dressing stones and keeping their surfaces flat. Set includes: Granite stone plate, 280 x 130 x 20 mm, flatness tolerance (colour may vary), No. 711294 100...
€47.70
DMT Dia-Flat Lapping Plate, 120 Micron
Trueing block with continuous surface diamond coating on compact steel base plate. Extremely durable due to a novel coating technology. Together with the large contact area and a flatness tolerance of (after diamond coating), this...
€219.00
DMT Dia-Flat Lapping Plate, 95 Micron
Trueing block with continuous surface diamond coating on compact steel base plate. Extremely durable due to a novel coating technology. Together with the large contact area and a flatness tolerance of (after diamond coating), this...
€214.00
Shapton Trueing Block with Diamond Coating
For ultra precise, absolutely flat trueing. Suitable for all water and ceramic stones. Flatness tolerance of < 0.05 mm (after diamond coating). Grit approx. 240 (54 micron). Designed for grits 500 and above.
€278.00
Naniwa Trueing Block, 170 x 55 x 30 mm
Hard ceramic block for trueing Japanese waterstones quickly and accurately. The stones are worked wet on the block until plane.
€18.90
Naniwa Trueing Block, 210 x 55 x 25 mm
Hard ceramic block for trueing Japanese waterstones quickly and accurately. The stones are worked wet on the block until plane.
€25.80
Trueing Block, 240 x 100 x 40 mm
Hard ceramic blocks for trueing Japanese waterstones quickly and accurately. The stones are worked wet on the block until plane.
€84.60
Trueing Grille for Sharpening Stones
Finely woven, silicon carbide-coated grille for trueing uneven sharpening stones. The grille is placed on a flat surface and the sharpening stone is rubbed over it in a circular motion.
€6.90
Nano Hone Universal Base Plate
These universal base plates are needed when using other sharpening stones on the Nano Hone sharpening stone holder No. 711219. The sharpening stone is glued onto the plate using a special adhesive tape for sharpening stones (No. 711244...
€22.90
€18.90
€32.40
€59.90
Sun Tiger Combination Stone, Grit 250/1000
For shaping and sharpening. 250 grit side green silicon carbide, 1000 grit side aluminium oxide.
€29.60
Suehiro Shaping Stone, Grit 100
Very aggressive, hard silicon carbide stone. Also suited for trueing other stones.
€24.80
Kunsuto Shaping Stone, Grit 220
Coarse-grained stone for material removal, repairs, removing nicks, changing the bevel angle, removing corrosion. Silicon carbide abrasive.
€36.90
Kunsuto Combination Stones
This stone features two different grit sizes. Abrasive: #1000 aluminium oxide and white aluminium oxide, # 3000 and 6000 white aluminium oxide.
€39.90
Kunsuto Sharpening Stone, Grit 600
Stones with medium sized grit for sharpening blunt blades. Abrasive: #600 aluminium oxide; #1000 aluminium oxide and white aluminium oxide; #3000 white aluminium oxide.
€33.90
Kunsuto Sharpening Stone, Grit 1000
Stones with medium sized grit for sharpening blunt blades. Abrasive: #600 aluminium oxide; #1000 aluminium oxide and white aluminium oxide; #3000 white aluminium oxide.
€44.90
Kunsuto Sharpening Stone, Grit 3000
Stones with medium sized grit for sharpening blunt blades. Abrasive: #600 aluminium oxide; #1000 aluminium oxide and white aluminium oxide; #3000 white aluminium oxide.
€48.20
Kunsuto Polishing Stone, Grit 8000
Fine grain water stones for removing the burr or polishing. White aluminium oxide abrasive.
€75.40
Kunsuto Polishing Stone, Grit 10 000
Fine grain water stones for removing the burr or polishing. White aluminium oxide abrasive.
€95.90
€79.00
Kunsuto Honing Stone, Grit 6000
Fine grain water stones for removing the burr or polishing. White aluminium oxide abrasive.
€58.70
Cerax Combination Stone, without Base, 1000/6000 Grit
With two different grits. Comes with Nagura stone.
€56.00
Cerax Combination Stone, with Base, 1000/6000 Grit
With two different grits. Comes with Nagura stone.
€69.00
Shapton Glass Stone HC Honing Stone, Soft Bond, Grit 4000
These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel).
€49.00
Shapton Glass Stone HC Honing Stone, Soft Bond, Grit 6000
These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel).
€54.00
Shapton Glass Stone HC Polishing Stone, Soft Bond, Grit 8000
These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel).
€79.00
Tormek Short Tool Jig SVS-38
For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.
€23.80
Shapton Glass Stone HR Shaping Stone, Hard Bond, Grit 120
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€29.00
Shapton Glass Stone HR Shaping Stone, Hard Bond, Grit 220
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€34.90
Tormek Gouge Jig SVD-186 R
For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.
€89.90
Shapton Glass Stone HR Shaping Stone, Hard Bond, Grit 320
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€38.00
Shapton Glass Stone HR Shaping Stone, Hard Bond, Grit 500
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€43.00
Tormek Turning Tool Setter TTS-100
For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).
€27.40
Shapton Glass Stone HR Sharpening Stone, Hard Bond, Grit 1000
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€43.00
Tormek Multi Jig SVS-50
Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.
€54.00
Shapton Glass Stone HR Sharpening Stone, Hard Bond, Grit 2000
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€49.00
Shapton Glass Stone HR Sharpening Stone, Hard Bond, Grit 3000
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€54.00
Tormek Drill Bit Sharpening Attachment DBS-22
Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...
€224.00
Shapton Glass Stone HR Honing Stone, Hard Bond, Grit 4000
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€59.00
Shapton Glass Stone HR Honing Stone, Hard Bond, Grit 6000
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€62.00
Shapton Glass Stone HR Polishing Stone, Hard Bond, Grit 8000
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€69.00
Shapton Glass Stone HR Polishing Stone, Hard Bond, Grit 10 000
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€119.00
Shapton Glass Stone HR Polishing Stone, Hard Bond, Grit 16 000*
The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
€124.00