Tormek T-4 Original

Free workshop voucher included!

Compact and versatile, the Tormek T-4 Original is also a water-cooled sharpening system that,...
Compact and versatile, the Tormek T-4 Original is also a water-cooled sharpening system that, due to its precision and stability, is suitable for sharpening chisels, knives, scissors, and smaller tools such as carving tools.
Both the vertical and horizontal holders for the universal support and the integrated carrying handle are made of a single piece of die-cast zinc.
The motor and main shaft are mounted on the cast top, forming a solid unit. This solid construction significantly improves accuracy during the sharpening process.
Extensive selection of guides.
Tormek »Original« grinding wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid die-cast zinc top including universal support with fine adjustment (can be used horizontally and vertically). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8.0 kg.

  • Stone grader (SP-650)
  • Pro Angle Master (WM-200)
  • Honing compound (PA-70)
  • Handbook (HB-10)
  • Edge marker (EM-15)
  • Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop

Tormek Sharpening System
Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.
The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.

Further advantages:
Longer service life, housing made of sturdy ABS plastic and integrated upper part made of die-cast zinc
Stainless steel spindle with EzyLock-System for easier stone fitting
Solid die-cast zinc housing with integrated vertical and horizontal support
    Further details on the manufacturer
    Exklusively at DICTUM: If you buy a Tormek T-8 or T-4 from DICTUM, you can choose between a voucher for free participation in a one-day workshop of your choice or a discount of 100 € for a multi-day workshop. The voucher amount cannot be set off against the purchase of products.
    Article no. 705195
    Brand Tormek
    Ready to ship today, delivery time 2-3 workdays within Germany
    €439.00 per piece(s)

    Prices incl. VAT


    plus shipping costs

    Many other models
    Type Price Quantity
    Tormek T-4 Original
    Tormek T-4 Original

    Article number 705195
    Plenty of accessories and spare parts


    DICTUM Japanese Grinding Wheel, Grit 1000

    Suitable for HSS as well as carbon steel and double-layered steel. Hard bond for highly effective polishing with little abrasion.

    Tormek Tool Rest SVD-110

    For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. »Torlock« locking system.

    Tormek Drill Bit Sharpening Attachment DBS-22

    Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...

    Tormek Gouge Jig SVD-186 R

    For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.

    Tormek Converter OWC-1

    Attachment to adapt the Tormek bench grinder mounting kit BGM-100 (No. 705225 ) directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.

    Tormek Square Edge Jig SE-77

    For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).

    Tormek Bench Grinder Mounting Set BGM-100

    Though primarily designed for turners, this mounting set, in combination with the gouge jig (SVD-186 R), the multi jig (SVS-50) and the tool rest (SVD-110), allows you to sharpen all turning tools with the Tormek system also on a...

    Tormek Small Knife Holder SVM-00

    Enables you to sharpen even the smallest knives like wood carving knives and pocket knives. Used in combination with the Tormek Knife Jig SVM-45.

    Tormek Scissors Jig SVX-150

    For all straight scissors' blades. Demountable hedge shears up to max. 200 mm. Blade thickness max. 9 mm

    Tormek Replacement Honing Compound PA-70

    The honing paste is used with leather honing wheels. Thanks to the unique properties of the leather combined with the honing paste, the burr is effectively removed without damaging the cutting edge. At the same time, the bevel is finely...

    (Content: €227.14 / 1 kg)

    Tormek Rubber Work Mat RM-533

    This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material...

    Tormek Short Tool Jig SVS-38

    For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.

    Tormek Profiled Leather Honing Wheel LA-120

    For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.

    Tormek Adjustable Trueing Tool TT-50

    With diamond tip, for trueing ingrained or unround grinding wheels.

    Tormek Multi Jig SVS-50

    Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.

    Tormek Stone Grader SP-650

    For regrading and dressing Tormek sharpening stones.

    Tormek Rotating Base

    Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/honing or sharpening towards or away from the edge. Fits all models.

    Tormek Axe Jig SVA-170

    For axe heads up to 170 mm in size (larger axes can be sharpened without a jig using the universal support).

    Tormek Turning Tool Setter TTS-100

    For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).